![jt65 mkii ic-7800 jt65 mkii ic-7800](https://m.media-amazon.com/images/I/41Bhmv91J6L._AC_.jpg)
- #Jt65 mkii ic 7800 install
- #Jt65 mkii ic 7800 mod
- #Jt65 mkii ic 7800 software
- #Jt65 mkii ic 7800 download
- #Jt65 mkii ic 7800 windows
#Jt65 mkii ic 7800 mod
If you are controlling RF output power by using the audio level on the computer, then you should be able to pick a usable constant level for USB MOD level.This controls your output power by controlling the audio level delivered to the IC-7300.
![jt65 mkii ic-7800 jt65 mkii ic-7800](http://hobbydocbox.com/docs-images/76/73055454/images/18-0.jpg)
For example, WSJT-X has a vertical slider on the lower right labelled “Pwr”.
#Jt65 mkii ic 7800 software
Your digital mode software should have an option or on-screen setting to change this level. Ultimately, this is the best way to control your RF output power. The output volume of your computer audio out (microphone).
![jt65 mkii ic-7800 jt65 mkii ic-7800](https://docplayer.net/docs-images/84/90897358/images/2-0.jpg)
The effective output power is determined by a combination of three settings: Reduce Your Transmit Powerĭon’t forget to reduce your RF output power when on digital modes. Values for AGC, NOTCH, NB, NR for digital modes. NB (noise blanker) and NR (noise reduction) both OFF.No Notch Filter – press the NOTCH button until it is OFF.You can check on the FUNCTION screen – COMP should be disabled. No compression – this should be automatically disabled when you are in USB-D mode.Alternatively, if you use RTTY or other narrower modes, you can use FIL2 or FI元 instead for BPSK31. So change the USB-D Filter 1 by long-pressing the FIL1 button on the screen, and set the BW to 3.0K or wider. The default for the Data modes is very narrow, and this doesn’t work well for BPSK31. You can set the Filters (1-3) for each mode (USB, USB-D, AM, etc.). It also lets you define a custom filter for BPSK31. (Click the Mode label in the upper left, select USB and select DATA.) The USB-D mode is needed so that the DATA MOD option works as expected. Now, when using a digital mode, you should use the USB-D mode. You want the fastest Baud rate possible.ĪF Output Level 40% (see text) USB MOD level, DATA OFF MOD DATA MOD USB Use USB-D Mode A side effect of this is the the CI-V USB Baud Rate will be limited to 19200. This setting seems to be required for most software programs using the CI-V function. Note: the CI-V USB Port setting should be set to “Link to ”.
![jt65 mkii ic-7800 jt65 mkii ic-7800](https://i.ebayimg.com/images/g/zwkAAOSwyEJe44I6/s-l400.jpg)
These are usually described in some detail for each digital control program you use, and can be set up so that all your software will talk to your IC-7300.
#Jt65 mkii ic 7800 install
They are related to the ICOM USB port driver you must install for Windows, the serial COM port number that ends up being the one used for your particular PC, and the baud rate you decide to use.
#Jt65 mkii ic 7800 windows
Windows will try to auto-install its own driver if you simply plugin the USB cable from the 7300 to the computer, and that one doesn’t work with the Icom USB interface.
#Jt65 mkii ic 7800 download
Be sure that you first download and install the Icom USB driver beforeconnecting your 7300 to the Windows computer the very first time. It is easiest to connect the IC-7300 using a single USB cable. See my other posts that address the specifics of DXLab Commander and HRD. These settings might be different for DXLab Commander and Ham Radio Deluxe. (e.g., BPSK31 using Ham Radio Deluxe Digital Master 780, fldigi, WSJT-X) These settings seem to work equally well with most digital modes, and digital mode software. This post shows the settings I use with my IC-7300 for digital modes over the USB connection from the 7300 to a Windows computer.